ZK-ATLAS-160

Shipping in
48h
  • PoE biometric access controller
  • Fingerprint, card, QR or PIN access
  • TCP/IP | Connection to slave controller
  • 2 readers by Wiegand | 2 readers by OSDP
  • Relay output for 1 door
  • Embedded ATLAS Series software and mobile app
  • Description
  • Specifications
  • Contents
  • Downloads

An access controller is a professional element for the protection of perimeters and gates. They are located in safe and hidden places, allowing the connection of the readers, which are placed in the visible place of the installation and identify the user who wants to access, as well as the connection to the electronic locks, which will be activated if the user is allowed access.

This controller supports readers based on the Wiegand protocol, which allows the connection through direct wiring of each reader to the controller. It has 2 readers to perform entry and exit at each door and supports biometric readers, which are connected through RS485 and allow connection through BUS (cascading). By supporting RS485, it also supports OSDP on the same connector, the latter being customizable in the configuration and allowing up to 2 readers by this method.

This model has 1 relay output, being configurable as dry contact (without voltage).

By using an access controller, it is possible to ensure certain functions, such as opening all doors when a fire signal is received or triggering an alarm when a forced door is detected. Thanks to its inputs and outputs, it is possible to manage these functions in a simpler way.

Advanced configurable functions: anti-pass-back technology (does not allow a person to pass through if he/she is already inside).

The ATLAS Series embedded software is used to configure users, schedules and access groups, as well as special functions, relay opening times or reader reading times.

  • ZKTeco
  • Biometric access control panel
  • Management of 1 door
  • Capacity 5.000 users and 10.000 records
  • Supports up to 2 Wiegand readers or 2 RS485/OSDP (V2.1.7) readers (card or fingerprint reader)
  • TCP/IP communication, Wiegand and RS485
  • Standard PoE power supply
  • 1 pushbutton input, 1 door sensor and 2 auxiliary inputs
  • 1 relay output and 1 auxiliary
  • Relay configuration NO/NC
  • Integrated ATLAS Series software
  • Web browser access to software for access control management and reports
  • ZK ATLAS mobile app for remote management of users, events, alarms and open remotely
  • Connection of ATLAS slave controllers with access from a single IP to 84 gates
  • Free license up to 25 gates
BrandZKTeco
ModelCON-ATLAS-160
CapacityUp to 5.000 users with 10 prints each or 5.000 cards/passwords
Records10.000 registers
Identification modesFingerprint, card, QR and/or password
Proximity cardEM RFID (125 kHz) / MF (13.56 MHz)
CommunicationTCP/IP | RS485 | Wiegand
Baud rate9.600bps at RS485
Outputs1 x relay output, 1 x auxiliary output
Inputs2 x Wiegand 26/34/37/50, 1 x RS485/OSDP (up to 2 readers), 1 x door sensor, 1 x open button, 2 x auxiliary
Advanced featuresAnti-passback, first card, multi-card and maps
Dynamic QRs
SoftwareATLAS Series embedded with browser-based access
LanguagesEnglish, German, Spanish, French, Italian, Portuguese, Polish, Turkish, Romanian, Norwegian, Czech
Secondary controllersConnection of up to 20 secondary controllers via IP with a control of up to 84 doors
Compatible web browsersGoogle Chrome, Mozilla Firefox, Microsoft Edge
Mobile AppZK ATLAS for iOS and Android
PowerDC 12 V / 3 A max. | Standard PoE power supply | Non-powered locks with controller
Temp. operation0 ºC ~ +55 ºC
Dimensions197 (W) x 171 (H) x 30 (D) mm
  • ZKTeco Access Controller
  • Mounting material
  • User instructions

alt