ICP-E(SCI)

Shipping in
48h
  • Analog hand pushbutton with SCI
  • Integral short-circuit isolator
  • Device activated" warning indicator
  • Resettable element
  • Non-frangible element installed as standard (according to EN54))
  • LPCB approved according to EN54 Parts 11 and 17
  • Description
  • Specifications
  • Contents
  • Downloads

ICP-E(SCI) is a manual alarm push button with integrated short-circuit isolator, fully compatible with Hochiki's ESP addressable analog protocol.

It incorporates a bicolor LED, which can be selected as flashing/non-flashing, for communication monitoring, and will light continuously when the device is activated, in these two states, the LED will light red, and will light amber when there is a short circuit, but will change to red if the unit is activated.

A panel-initiated test function ensures the integrity of the device at all times and can be tested by inserting a test key into the bottom of the panel.

With two terminals for easy connection to the loop wiring, it is addressed with the TCH-B200 portable programmer.

Back box included.

  • HOCHIKI
  • Analog hand pushbutton with SCI
  • Rearmable, but mimics the sensation of glass breakage
  • Integral short-circuit isolator
ReferenceICP-E(SCI)
Case color / material Red, ABS/Policarbonato/PA6 + fiberglass
Operating voltage 17-41 VCC
Low power mode220 µA (max.), 145 µA (typical)
Standby current350 µA (max.), 250 µA (typical)
Alarm current 10,0 mA (max.), 5 mA (typical)
Positive resistance 100 mΩ when closed (max.), 100 kΩ when open (min.)
Short circuit threshold (typical)430 Ω
Method of transmission Digital communication via ESP
Operating temperature range-10°C to +50°C
Storage temperature range -30°C to +70°C
Maximum humidity 95 % RH non-condensing (at 40 °C)
Weight (g) / Dimensions (mm) 110 / W 88 x H 87 x D 25 (with back box for surface mount 161 / W 88 x H 87 x D surface mounting 55) / W [%VAR%] x H [%VAR%] x D [%VAR%]
  • Analog hand pushbutton with SCI

alt