TK-NTP001
  • alt
  • alt
  • alt
  • alt
  • alt

TK-NTP001

Shipping in
48h
  • Teltonika Industrial Ntp Server
  • Port RJ45 10/100Mbps
  • Ports RS232 and RS485
  • Description
  • Specifications
  • Contents
  • Downloads

The NTP001 is a Teltonika stratum 1 NTP server designed to synchronize accurate and traceable UTC time over public and private networks, without the need for Internet access. Thanks to its GNSS capabilities, this low-cost NTP server maintains accurate and traceable time according to UTC. Plug-and-play functionality, a wide variety of interfaces, including RS232 and RS485, and a robust security profile make NTP001 the perfect NTP server for your network.

  • Industrial Ntp Server
  • Port RJ45 10/100Mbps
  • Serial ports RS232 and RS485
  • 3x Digital Inputs/Outputs
  • Power Connector Industrial Terminal Block
  • DC power supply 9 to 30V ( power supply not included )
  • Rugerized
  • Status LEDs
BrandTeltonika
DeviceIndustrial Ntp Server
CPUMediatek, 580 MHz, MIPS 24KEc
RAM128MB
Flash16MB
Serial PortsRS232 y RS485
Operating SystemRutOS (Based on OpenWRT)
NTPServer mode receives the GPS time and acts as an NTP server to transmit the time to other devices (Stratum 1)). Transmits the time via UDP or serial port (RS232, RS485).
Time and date protocol via TCP/UDP.
Date via serial port RS232/RS485.
NTP NTPv4, NTP authentication (MD5/SHA1), unicast/multicast/broadcast mode.
NTP Protocol: Time server Stratum 1 (NTPv4).
NTP accuracy: Ethernet NTP ±1 ms in general.
NTP performance: >300 NTP requests per second.
Synchronization accuracy: LAN synchronization: typically 1–10 ms.
ModBusSupported modes: Server, Client
Supported connection types: RTU (RS232, RS485), TCP
Customized records: mODBUS TCP custom register block requests, which read/write to a file within the router and can be used to extend the functionality of the MODBUS TCP client.
Supported data formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
MQTT GatewayAllows sending commands to and receiving data from the MODBUS server through the MQTT intermediary.
Serial port functionsTerminal block connector RS232: TX, RX, RTS, CTS
Terminal block connector RS485: D+, D-, R+, R- (2 or 4 wires interface)
PositioningGPS, GLONASS, BeiDou, Galileo and QZSS
Monitoring and ManagementWEB UI : HTTP/HTTPS, status, configuration, firmware upgrade, CLI, troubleshooting, multiple event log servers, firmware upgrade availability notifications, event log, system log, kernel log, Internet status
SSH SSH (v1, v2)
SNMP SNMP (v1, v2, v3), SNMP Trap, brute-force protection
JSON-RPC Management via API over HTTP/HTTPS
MODBUS MODBUS TCP status/control
PowerTerminal Block Connector 16 Industrial Pins 9~30V ( power supply not included )
MaterialAluminium
Temp. operation-40º C ~ +75º C
Operating humidity10 ~ 90 % (non-condensing)
Optional Mounting Kit (Not included)Rail Mounting Kit, Compact Rail Mounting Kit, Surface Mounting Kit
Dimensions25 (Al) x 83 (W) × 82,6 (D) mm
Weight180 g
Inputs and Outputs3 x Configurable Inputs/Outputs. Digital Input to 0 - 6 V is detected as low level, 8 - 30 V detected as high level. Open collector output, maximum output 30 V, 300 mA
  • Industrial Ntp Server
  • User instructions
  • Terminal Block 16 Pins
  • Hexagonal wrench

alt